Het productaanbod van Honutec BV

Silence 4NM

JOVENTA SILENCE electric damper-actuator series have been developed to operate small and medium air dampers in ventilation and air conditioning systems. The compact design and universal adapter fitted with limitation of rotation angle make this JOVENTA actuator highly versatile.

Shaft 6...16 mm Ø,
Square shaft from 8...12 mm,
Minimal damper shaft length 45 mm

Torque: 4 Nm

Standard 8 - 16 - 24 - 32 NM

JOVENTA STANDARD electric damper-actuator series have been developed to operate small and medium air dampers in ventilation and air conditioning systems. The compact design and universal adapter fitted with limitation of rotation angle make this JOVENTA actuator highly versatile.

Simply direct-mount with universal adapter on Ø 10 mm to 20 mm shaft or square shaft from Ø 10 mm to 16 mm.
48 mm minimum shaft length.

Accessories for Joventa damper actuators.

Mounting accessoires

• Transmitters for modulating actuators 24 V and 230 V
• Protective Housings, where IP65 protection is necessary.
• Temperature sensors for monitor the temperature in air ducts

Mixing-Actuator

JOVENTA VALVE electric mixing-actuator series is intended for operating water valves such as mixing valves, butterfly valves, inter-flange dampers and ball valves. The mixing-actuator is designed so that t can be fitted using the relevant fitting kid, to many different makes of valves. The universal coupler between the actuator and valve make an uncomplicated application possible.

Torque: 6 Nm for dampers to 1,1m²
DN80, incl. manual release button and position indicator
Running time: 125 sec.

Springback 6 NM

JOVENTA SPRINGBACK electric, spring return damper-actuator series has been specially developed for the motorized operation of safety air dampers. When the control signal is applied the actuator drives the damper to the operational position, while evenly tensioning the integrated spring. Should the power supply to the actuator be interrupted, the stored energy in the spring wil immediately move the damper to the safety position.

Simple direct-mount with universal adapter
on Ø 10 mm to 16 mm shaft or
square shaft from 10 mm to 14 mm.
45 mm minimum damper shaft length

Torque: 6 Nm, for dampers to 1,1 m²
running time open 10..40 sec, close with spring 35..70sec.

Springback 16 NM

JOVENTA SPRINGBACK electric, spring return damper-actuator series has been specially developed for the motorized operation of safety air dampers. When the control signal is applied the actuator drives the damper to the operational position, while evenly tensioning the integrated spring. Should the power supply to the actuator be interrupted, the stored energy in the spring wil immediately move the damper to the safety position.

Simple direct-mount with universal adapter
on Ø 10 mm to 20 mm shaft or
square shaft from 10 mm to 16 mm.
72 mm minimum damper shaft length

Torque: 16 Nm, for dampers to 4 m²
running time open 90..120 sec, close with spring 10sec

Springback 10 -20 NM

JOVENTA SPRINGBACK electric, spring return damper-actuator series has been specially developed for the motorized operation of safety air dampers (anti-icing) in airconditioningsystems, smoke evacuation dampers and sealing dampers.

Simple direct-mount with universal adapter
on Ø 12..19 mm roun- axis or
square shaft from 10,12 or 14 mm.
80 mm minimum damper shaft length

Torque: 10 Nm and 20 Nm, for dampers to 4,6 m²
running time open 10..40 sec, close with spring 35..70sec